How to color hair from black to brown

how to color hair from black to brown

Sep 23,  · Developer is mixed with the dye in order to give it the lift needed to lighten your hair and dye your black hair brown, while the dye itself will tone your hair to the desired shade as it lightens. This will work for a dark brown or medium brown result very consistently. Jun 26,  · Whether you opt for a permanent hair dye or semi permanent hair dye, it’s a cinch to dye your locks to the desired shade of brown. Mix the hair dye with 10 volume peroxide and thoroughly saturate your mane. Once all of your hair is covered with the brown coloring, leave it on until you have reached the desired shade of brown.

Before you even think about heading to the beauty store, you need to assess your strands to get the right kind of dye. All you need to do to achieve this is to purchase a box of brown hair dye in the desired shade you would like, one bottle of 30 volume developer, and all the tools necessary to dye your locks. The reason you need to mix these together is because the developer will lighten up your locks to the desired dark or medium brown color while the dye itself will tone the hair and keep it at the right shade.

If you would rather take your natural black locks to a light brown shade, the process becomes a tad bit more complicated. Once you are finished bleaching your black hair, choose the boxed light brown shade you desire and apply it to your locks. Again, remember to have all of the equipment necessary like a brush and bowl for easy application. You would think it is as easy as trotting down to the local beauty shop and buying the brown hair you want, right?

You see, black hair has natural red and copper pigments that are easily noticeable when the strands are lightened. For this fact, you need to be careful when choosing the box hair dye that is right for you. Unfortunately dying black hair that is not naturally black is a much longer and difficult process. You see, applying brown hair dye on top of boxed black hair will do literally nothing.

However, its not impossible. In oder to lighten up your locks you will need what is the temperature in adelaide now use powder bleach mixed with a 20 volume developer. Mix together and apply liberally to your locks.

Once you have sectioned your hair and applied the bleach thoroughly from root to tip, leave the bleach treatment on for up to an hour. Check the shade but also check the health of your hair, as bleach can be very intense and destructive to locks.

In the case that your hair feels unhealthy or dry, you should have a conditioner on how to potty train a standard poodle to help with the health of your locks. Wash out the bleach with cool to warm water, shampoo, and thoroughly condition your hair. When it comes to dying your box black hair to a brown hue, you must purchase an ash brown shade as you need to tone down the red hues in your locks and ash brown will do this automatically.

It is suggested that you purchase an ash brown shade that is one shade lighter than what you want as your hair will likely not grasp the lighter hues but settle at a nice natural looking shade. Mix the hair dye with 10 volume peroxide and thoroughly saturate your mane. Once all of your hair is covered with the brown coloring, leave it on until you have reached the desired shade of brown. Remember to check on your hair often as coloring could be a long or short process, depending on how well your hair responds to the dying process.

Luckily, dying your hair a brown shade is not as hard on the hair as bleaching. Simply using your conditioner often and keeping your mane in good health is enough. However, you will always need to re-apply the hair color every few weeks when you start to notice any kinds of fading.

On the other hand, if you used bleach during your dying process, you need to take extra special care of your mane as bleaching causes a lot of trauma to the how to build a toad habitat. Leave o- conditioners will ensure your hair is being repaired and moisturized throughout the day and night.

One great DIY hair mask is the following:. Mix together and apply thoroughly to your mane. Leave this treatment on before washing off with cool water. Repeat 2 times a week for the best results. These oils are rich in nutrients and have the potential to heal and moisturize your locks with ease. In the event you need to use your hot tool, apply conditioner beforehand.

There are specialty products out these specifically designed to take care of hair before using hot tools. Pay attention to how you apply the dye as well, making sure there is no strands left untouched for even, fabulous results. Enjoy your new beautiful brown mane! Have you ever dyed your hair from black to brown? How did it go? What were your results? What steps did you take?

Share with us! Your email address will not be published. By Michelle Keldgord on June 26, How to Remove Red Hair Dye. Best Hair Bleach. How to Fix Orange Hair. Leave a Reply Cancel reply Your email address will not be published. Leave this field empty. Posted May 11, 6. Posted How to color hair from black to brown 17, 1. Posted April 7, 2. Posted March 19, 6. Posted February 24, 6.

Posted February 18, 0. Posted February 15, 0. Search this site.

Dyeing Virgin Hair

Hairdresser, marketer, and dabbler in many things. I enjoy sharing knowledge about the science of hair coloring and hair care. Black hair is a very sultry and chic color, but it doesn't suit everyone. Whether you've decided to try black hair and just didn't like it, or your hair is naturally black and you'd like a change, you can dye black hair brown and achieve a beautiful result.

When lightening hair, it's important to consider whether your hair is naturally black or you obtained the color with black hair dye. If your hair is naturally black, and you haven't dyed it in the past, this is called virgin hair.

Virgin hair lightens really well and the process is generally much easier. Dye, on the other hand, can be more stubborn to remove, and it is best to use hair dye remover as a first step to try to remove as much of the artificial color as possible for a healthier, even result.

The process of dyeing your hair brown will be different if you've dyed it before. Another factor that needs to be taken into consideration is the general condition and strength of your hair.

Whether it's been dyed before or is in its natural state, if your hair is fragile or damaged this needs to be addressed to keep it feeling and looking healthy when you dye it a new color.

Virgin hair contains no artificial color and it is much more responsive to chemical treatments. This means that it can be lightened effectively without bleach.

This is in comparison to hair that has been colored with hair dye and needs to be lightened with bleach if you wish to go a lighter shade than your current color. If you're working with virgin hair, all you will need is the desired shade of brown hair dye, a bottle of 30 or 40 vol developer, and the usual dye application tools like a tinting brush and bowl.

Developer is mixed with the dye in order to give it the lift needed to lighten your hair and dye your black hair brown, while the dye itself will tone your hair to the desired shade as it lightens. This will work for a dark brown or medium brown result very consistently. If you'd prefer a light brown color however, you can use 40 vol developer but you should consider pre-lightening your hair with bleach first in order to ensure it will be light enough as this is more reliable.

After this, you can tone your hair with a light ash brown dye to neutralize the warmth and achieve a light brown color. The process here is the same as if you had dyed your hair black and both methods will be explained so that you can choose the best technique for your own needs. A useful tip when you are dyeing hair a lighter color is to use a hair dye shade that is cooler than your desired shade.

Whenever you lighten black hair, lots of red and copper pigment is revealed because the base tone of your hair becomes visible. In order to dye your hair a nice shade of brown, you not only have to lighten it, but neutralize these warm tones so that the color looks natural.

Another alternative to achieve this is to mix a small proportion of ash shade into the shade you actually want and this will decrease the appearance of warmth in the final result. If however, you would like a red shade of brown, stick to the precise shade. In this case you don't need to cancel out any of the warm tones. Any warmth that is revealed will work to your advantage and allow you to reach a more vibrant shade of auburn.

When you choose a dye, use ash brown shades for a natural brown result, and natural brown shades for a warmer result. For auburn shades and other shades of red brown, use the exact desired shade. For this process, you can reach a level 4 medium brown at most. If you want a lighter shade of brown hair, you may be able to achieve this by using 40 vol, but you will likely need to bleach your hair before dyeing it for a more reliable result.

This will depend on how your hair reacts to lightening. When you dye your hair, you will always get the best results by using a high quality professional salon brand. Choose shades from brands like Indola, Matrix, Wella, and Igora for great results every time you dye your hair.

This is not only because the dye is better, but also because it is easier to mix shades if required. If you need to use a box dye for whatever reason, discard the supplied developer and add your own so that you can at least know how much lightening to expect. The provided developer may only be 10 or 20 vol in a brown color because the assumption is that lift is often not needed, which isn't the case in black hair. Avoid using it if you don't know what strength of developer is included in the product because you need to have control of this for the dye to lift correctly.

The shade of dye you have chosen needs to be mixed with developer before it can be used. The developer not only works to lighten your hair, it drives the entire dye reaction and makes the dye permanent.

For tone on tone dyes, you should use 10 vol peroxide to dye your hair with very little lightening. However, to dye black hair brown, you will need to use at least 30 vol developer in order to maximize the lightening effect or it won't lift to the desired level. Developer is usually added to dye in a ratio of dye to developer, though this can vary with manufacturer with some hair dye manufacturers recommending a Use the ratio recommended by the brand you have chosen and mix the dye up using your tinting bowl and brush.

To apply the dye quickly and accurately, it is important to section your hair properly. The easiest method to do this is to divide your hair into four individual sections. You can do this by parting the hair down the middle from your forehead to the nape of your neck, then again from each ear, clipping the individual sections aside. This leaves you with four quadrants to work on.

Now that you have your hair sectioned in quadrants, begin applying the dye to your first quadrant from the back of your head, working around to the front. The way you have sectioned your hair will allow you to apply the dye very quickly and this is necessary for even lightening and a natural looking color. When you apply the dye to a quadrant, pick up thin layers of the section you're working in and brush dye onto both sides of each layer, working down from the top of the quadrant until you've completely covered that section.

Move through each section like this and you'll be done in no time. Development time is the critical factor now. For maximum lightening and to reduce fading of the final color, you need to leave the dye on for the full recommended time of your hair dye brand. This is usually 45 minutes. You can take this time to relax and prepare to wash the dye out. Once the development time has passed, rinse out the dye and enjoy your new color.

If your hair has been dyed black, you can't use another hair dye to strip out this artificial pigment. The popular hairdressing maxim that 'color can't lift color' reigns supreme here and you will need to use bleach first to pre-lighten your hair.

This is a two step process, but it isn't that much more complicated compared to a virgin application. Dyed hair won't respond properly to another hair dye and you will need to bleach it to lighten the color first. For this process you will need powder bleach, 20 vol developer, and hair dye application tools.

The powder bleach is mixed in a ratio of powder to developer with a tinting bowl and brush unless your brand specifies a different ratio.

You will guarantee the best results by using a quality brand like Wella, Indola, or Matrix. To apply bleach, divide your hair up into the four quadrants explained earlier and begin applying the product to each section just like you would apply a dye. In this case, you will need to work at a decent speed to ensure the lightening is even.

If you aren't able to apply it quickly, you would be best to practice your skills before you decide to use bleach to avoid unevenness. Once you have applied the bleach to your entire head, allow this to process for up to an hour depending on brand used and the maximum recommended processing time, checking it every 5—10 minutes as it works. It is not likely that it will take the entire time to strip out the black color, so checking the bleach regularly is very important.

You only need to reach a deep red color for dark brown, red-orange for medium brown, or orange for light brown. You can rinse the bleach out once this has been reached. At this point your hair will be an orange or red color.

This isn't the final result. Bleach is used to remove color from your hair, but you can't use it to dye your hair brown, just like you can't really use it to dye your hair a nice shade of blonde.

To transform this red shade into an actual natural shade of brown and finish the process, you will need to tone your hair with a dye. When you dye virgin hair with a hair dye, the dye lightens and tones your hair in a single process. When you bleach your hair, this toning has to be done separately because bleach can't add tone to your hair. For this you will need an ash brown shade of hair dye to neutralize the red base tones and form a natural brown color.

The ash dye should be one shade lighter than your desired color. You can use a permanent dye for lasting color, or a semi-permanent dye to tone it without causing any chance of damage. The caveat here is that a semi-permanent dye won't hold as well and will need to be repeated every few shampoos to maintain your color.

It is best to use a permanent shade to add permanent tone back in and follow this up with a semi-permanent dye should you need to refresh your brown color. If you're using a permanent dye as the toner, mix this with 10 vol peroxide and apply it the same way you applied the bleach by working through quadrants of your hair. When the dye has been completely applied, allow it to develop until the warmth in your hair has been neutralized and it reaches your desired shade of brown, then rinse.

A new hair color is beautiful, but in order to keep it that way, it's important to care for it properly. In particular, you will need to tone it every so often as warmth creeps up when the dye begins to fade.

Fading is unavoidable when you dye your hair, but occasional toning or retouching will allow you to keep your desired shade as vibrant as the day you dyed it.

If you have a question about dyeing black hair brown or an experience to share, leave a comment below for tailored advice and share your insight with other readers.

I have natural black and gray hair. Last use Clariol dk brown 6 mo ago. I want to highlight the gray. Can i use a light golden brown or blond to mKe ths gray tinted and shinny. Will it color the black? Hi Maffew! Thank you SO much, this was by far the most helpful article I have found for lightening dark hair and I am amazed at how knowledgable you are in hair colouring! I have about level 2 asian hair and I am hoping to lift it up to about a level 4 with neutral-cool tones.

I'm so sorry, I have a lot of questions - hope you are still up to answering them:. I have natural black hair but I also color it about every 6 to 8 week to cover grey, I am wanting to go brown instead of pitch black, what suggestions do you have for that process?

Color stripper, bleach, toner or permanent color?

How to color hair from black to brown: 5 comments

Add a comment

Your email will not be published. Required fields are marked *